Why Is The Blink Camera, Black And White [Guide]

Blink Camera

If your Blink camera displays images in black and white, you will most likely have the infrared capability enabled in the night mode settings. IR, often known as infrared, uses heat to capture images, which are then displayed in monochrome.

You may repair your camera with a few different methods. It is simple to troubleshoot this issue, and it should just take five minutes.

Blink cameras are designed to generate crisp, colorful images. The camera may only be able to record a black-and-white image if the scene under observation is very dark. This is because a specific level of light is needed for the camera to record color photos.

Because there isn’t enough light for your Blink camera to work correctly, it is most likely showing in black & white. And also, you might need to upgrade the firmware on your Blink camera, as described on the Blink website, or the color filter may be damaged.

It might not be getting enough light as one explanation. Compared to color cameras, black & white cameras require more light to operate correctly. If the area surrounding your camera is very dark, try putting on a light or moving the camera to a more sunny location. The color filter on the camera can also malfunction as a factor.

When the filter becomes clogged or damaged, this occasionally occurs. Try wiping the filter with a soft cloth or ask Blink customer service for help. Your camera’s firmware may also require updating, which brings us to our final possibility. 

Following the directions on Blink’s website, you can update the firmware if you’ve ruled out all other potential problems. The possibility that the night vision setting is active is another explanation.

The Blink Outdoor cameras use IR illumination to provide night vision. As a result, the image is in black and white. Go to the camera settings to disable the IR illuminator. The image will take on color as a result. If you set this to Auto, the camera will decide whether or not it needs to use the IR Illuminator. Clear, colorful images can be captured with blink cameras.

But if the scene they observe is too dark, the camera might only be able to display it in black and white. The camera requires a specific light level to produce color photographs. The camera automatically switches to black and white mode when there isn’t enough light to capture the best potential image. 

While it may not seem perfect, it is still preferable to being completely blind. Therefore, poor lighting conditions are probably at blame if you discover that your Blink camera only displays black and white photographs.

Night Vition

You can snap images in low light thanks to the night vision feature on most digital cameras. However, it is possible for this setting to be turned on, producing grainy and useless photos unintentionally. 

It’s simple to disable the night vision setting on your Blink camera if you find yourself in this circumstance, so don’t worry. Open the Blink app, then select the ‘Settings tab. 

You should then have the choice to turn off night vision. After that, your Blink camera will function normally, allowing you to capture clear pictures in any lighting situation.

A common query is if Blink security camera users may turn off the red light. The system requires this red light, the IR illuminator, to operate in IR mode. In the settings of the Blink App, you must disable IR if you wish to turn off the red light.

If you do this, your camera won’t operate in IR mode at night. Some individuals tape over the red light, although that would also interfere with the IR function. Leave it alone if you can.

It would assist if you weren’t concerned because, on some versions, the red light only illuminates when it detects movement.

Why does your camera record in black and white?


The IR function is a part of the Blink security system. When you enable this setting, the camera will record video in IR mode, resulting in a black and white image on the screen.

This option is useful when there isn’t enough light for the camera to record in color because your Blink camera won’t function properly in low light. Even though IR operates differently from true night vision, some people call it “night vision.”

IR is a fantastic feature, but it might not be very pleasant if your camera is accidentally recording in black and white when it shouldn’t be. 

Fortunately, this issue can be fixed with a few simple changes.

Consider the illumination around your camera as a starting point. 

The IR mode will probably activate automatically if it is in the shadow or a dimly lit environment. All you need to do is move the camera somewhere more lit up.

If that doesn’t work, you’ll need to access the settings on the Blink camera app. Next, navigate to the “NIGHT VISION” section; if the “Control” setting is set to “On,” your camera will only display in IR mode. You can choose between “Off” and “Automatic.”

The camera will never go into IR mode if this option is disabled. That’s okay as long as you have your camera positioned in a constantly sunny or bright location. However, you should be aware that it will not record video in the dark.

There are ways to do it:

  1. Check if IR mode is enabled
  2. Increase light condition
  3. Try soft reset blink camera
  4. Turn off night vision.

Some individuals use night vision to take images at night to notice moving objects in the shadows. But keep in mind that night vision only records black-and-white images. You can disable the night vision by navigating to the settings to prevent this.

Check if IR mode is enabled.


Verify that IR mode is on. When the IR mode on your blink camera is on, your camera will automatically begin taking all pictures in black and white—deactivating it or setting it to automatically is, therefore, preferable. Disable IR mode by following the procedures.

  • The camera options are found on the blink app’s home screen.
  • The night vision section is down below.
  • Offset the IR led or set it to operate automatically.

How to Enable IR on Blink Cameras

Increase the lighting conditions

As we just stated, for your camera to capture an image, there must be adequate light in the surrounding area; otherwise, the image may appear in black or white. Try to brighten the area around the camera, use nightlights, and set up a theme close to the camera range to fix the lightning issue.

You might try resetting your Blink camera if you’ve tried changing every setting for “NIGHT MODE,” but nothing seems to be working. Remove the batteries, wait a few minutes, and then let the camera restart to accomplish this. If there is a connection error, this sometimes resolves the problem.

You can try a few methods to reset your Blink camera if it isn’t working properly. First, ensure the camera is turned on and the batteries are still charged. Try restarting the Blink application if the issue continues. You can attempt to reset the Blink system by depressing the reset button for 10 seconds if that doesn’t work. 

If everything else fails, you can always factory reset your Blink camera by holding the reset button for 20 seconds. You should make a backup of any crucial recordings before doing this since it will delete all of your Blink footage. You should be able to restart your Blink camera quickly by using the instructions listed above.

If you turn off the night mode, the black-and-white problem persists. The camera may then have a momentary bug, which you can easily repair by soft resetting the blink camera.

  • Eliminate the battery.
  • Wait for a while.
  • Back into the battery.
  • Verify if the problem is fixed.

How does infrared night vision work?

Infrared security cameras are surveillance cameras that can take pictures in low light by combining visible light spectrum with infrared radiation.

Infrared security cameras, as opposed to conventional security cameras, can provide quality images even in complete darkness. On the other hand, traditional security cameras need a lot of light to operate. 

The human eye cannot see infrared light but may be picked up by the camera’s sensor. The sensor must first transform the infrared light it detects into an electrical signal to create an image.

One benefit of infrared security cameras is that they work in various lighting situations, from total darkness to intense sunlight. The use of these kinds of cameras does have certain drawbacks, though. A drawback of infrared security cameras is that it might be challenging to determine whether they operate properly because infrared light is invisible to the human eye. 

Furthermore, these cameras may cost more than more conventional security cameras. However, the advantages of employing an infrared security camera outweigh the drawbacks for many individuals.


It is simpler to record video at night or in poor light situations using Blink cameras because they have an IR function. Many users, however, find it annoying when their camera appears to get stuck recording in black and white. Either reset the camera or change your app’s “NIGHT MODE” settings to remedy this.


4 Ways to Disable The Smart Drive Camera

Can you view Multiple Blink Cameras at Once?

Funny Ring Doorbell Names

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Article
drive Camera 1

4 Ways to Disable The Smart Drive Camera [Guide]

Next Article
Wyze Camera

How To Reset Wyze Doorbell [Step By Step]

Related Posts